MHX-530 High-Efficiency Dual-Pass Oil Cooler

Description: Improved Racing's Motorsport Heat Exchanger (MHX) series oil coolers are the result of several years of development and testing to create a highly efficient oil cooler. These coolers were perfected through extensive testing on our in-house heat exchanger test system and wind tunnel.The MHX-530 oil cooler is a dual-pass oil cooler that matches heat rejection rates to larger, heavier stacked-plate coolers made by brands such as Setrab, Mocal, and Earl's. Compared to a typical 50-row stacked plate cooler, this cooler is 20% smaller overall and 15% lighter, yet holds 64% more fluid volume. The core is 23% thinner and has a lower row and fin density, allowing more air to flow through the cooler to other heat exchangers (such as a radiator) behind it.A major design focus was to minimize welds and brazings to make these coolers stronger, lighter, and less prone to leaks. All four end caps are single-piece CNC-machined billet aluminum. The rows consist of laser-welded, thin-gauge aluminum tubes stuffed with turbulators to maximize heat transfer while minimizing weight. The dual-pass design also maximizes heat transfer efficiency.There are four M8x1.25 mm mounting holes, one on each corner of the cooler. Improved Racing has designed lightweight aluminum brackets (sold separately) to make mounting your cooler as easy as possible. The brackets feature integrated rubber isolators that protect the cooler from excessive vibration and extend the life of the cooler.The MHX 500-series coolers feature -10AN female O-ring boss ports on the same side of the end tank for convenient line routing. Optional fittings are available in -6AN, -8AN, -10AN, and -12AN JIC male flare threads.All Improved Racing oil coolers are pressure tested to 175 PSI to ensure no leaks and are rated for continuous operation at 150 PSI. Our coolers are made in the USA and backed by our Lifetime Warranty.CNC-machined billet aluminum tank end caps with machined mounting holes on all four corners 3/8" or 1/2'' hose barb fittings or AN fittings in -06AN, -08AN, -10AN, or -12AN are available with the purchase of a cooler Vibration isolating mounting brackets available (sold separately) Features and Benefits Compact, lightweight design is 20% smaller, 15% lighter, and has 64% more oil capacity than a 50-row stacked plate oil cooler. Similar heat rejection rates to larger 50-row stacked plate oil coolers. Dual-pass design. Lower air side pressure drop than stacked plate coolers. Female O-ring boss -10AN ports on same side of end tank. 4x flanged M8 mounting screws are included. Lifetime Warranty. Made in the USA. Dimensions and Specifications Part # Rows HP Range A (Total Height) B (Port Spacing) C (Port Offset) Passes Fittings / Ports Weight Capacity Mounting Holes MHX-515 15 300-410 HP 7.0 in (178 mm) 4.6 in (116.8 mm) 1.17 in (29.6 mm) 2 -10AN O-ring Boss 2.98 lb (1.35 kg) 0.75 Qt (0.71 L) M8 x 1.25 MHX-521 21 400-500 HP 9.6 in (244 mm) 7.40 in (188.0 mm) 1.17 in (29.6 mm) 2 -10AN O-ring Boss 3.8 lb (1.7 kg) 1.04 Qt (0.98 L) M8 x 1.25 MHX-530 30 600+ HP 13.5 in (343 mm) 11.5 in (292.1 mm) 1.40 (35.6 mm) 2 -10AN O-ring Boss 5.64 lb (2.45 kg) 1.50 Qt (1.42 L) M8 x 1.25 Optional Parts Sold Separately Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Note: Our fittings are required to guarantee compatitility with our oil coolers, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required 5/16" Barb OB-10-05 2 3/8" Barb OB-10-06 2 1/2" Barb OB-10-08 2 -6AN OM-10-06 2 -8AN OM-10-08 2 -10AN OM-10-10 2 -12AN OM-10-12 2 Inline Sensor Fittings (Optional) Use these fittings to add an inline sensor to any of the available ports. Line Size and Sensor Port Size Part Number Qty Required -6AN Male to -6AN Female, 1 x 1/8" NPT Sensor Port TR-06-02 0-2 -6AN Male to -6AN Female, 2 x 1/8" NPT Sensor Port TR-06-02-B 0-2 -8AN Male to -8AN Female, 1 x 1/8" NPT Sensor Port TR-08-02-A 0-2 -10AN Male to -10AN Female, 1 x 1/8" NPT Sensor Port TR-10-02-A 0-2 -12AN Male to -12AN Female, 1 x 1/8" NPT Sensor Port TR-12-02-A 0-2

Price: 499 USD

Location: Orlando, Florida

End Time: 2024-09-22T23:15:29.000Z

Shipping Cost: 9.95 USD