Low Profile Remote Oil Filter Take-Off Adapter

Description: Improved Racing's low profile remote oil filter takeoff is less than two inches thick for maximum clearance in tight spaces. The adapter also swivels, allowing the ports to be oriented in any direction. The internals are optimized to minimize pressure drop at high flow rates. Passages were made as large as possible and undercuts were used to maximize flow area. If you need to relocate your oil filter, this is one of the best options out there! The oil line ports are -10AN O-ring boss ports and adapters are available for -8AN, -10AN, and -12AN lines. Patent pending design.Features and Benefits Replaces the factory oil filter filter, allowing for a remote oil filter setup and the addition of an oil cooler -10AN (JIC/SAE) O-ring boss ports for oil lines Low profile, swiveling design fits in tight spaces O-ring seal inner diameter: 2.48" O-ring seal outer diameter: 2.76" CNC-machined 6061-T6 billet aluminum construction with MIL-A-8625 Type II black anodized finish All FKM (Viton) O-ring seals for maximum temperature range, fluid compatibility, longevity and reliability Lifetime Warranty Made in the USA Optional Adapter Fittings Available in -8AN, -10AN, or -12ANIncludes 1x Low profile oil filter take off 1x Viton (FKM) seal 2x Black anodized -8AN, -10AN, or -12AN adapter fittings with Viton O-rings (OPTIONAL) Applications Fits most standard automotive filter flanges that can accept an O-ring seal with an ID of 2.48" and an OD of 2.76" Required Parts Sold Separately Important: The parts below are sold separately. The filter thread adapter bung is required and must be purchased separately. Filter Thread Adapter Bung (REQUIRED) The filter thread adapter bung is available in multiple thread sizes and is sold separately. Please purchase the bung size needed for your application based on the table below. Filter Thread Size Part Number Qty Required 3/4"-16 HSC-5100 1 M20x1.50 HSC-5101 1 13/16"-16 HSC-5102 1 M22x1.50 HSC-5103 1 Optional Parts Sold Separately Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Line Size Part Number Qty Required 5/16" Barb OB-10-05 2 3/8" Barb OB-10-06 2 1/2" Barb OB-10-08 2 -6AN OM-10-06 2 -8AN OM-10-08 2 -10AN OM-10-10 2 -12AN OM-10-12 2 Inline Sensor Fittings (Optional) Use these fittings to add an inline sensor to any of the available ports. Line Size and Sensor Port Size Part Number Qty Required -6AN Male to -6AN Female, 1 x 1/8" NPT Sensor Port TR-06-02 0-2 -6AN Male to -6AN Female, 2 x 1/8" NPT Sensor Port TR-06-02-B 0-2 -8AN Male to -8AN Female, 1 x 1/8" NPT Sensor Port TR-08-02-A 0-2 -10AN Male to -10AN Female, 1 x 1/8" NPT Sensor Port TR-10-02-A 0-2 -12AN Male to -12AN Female, 1 x 1/8" NPT Sensor Port TR-12-02-A 0-2

Price: 119 USD

Location: Orlando, Florida

End Time: 2024-01-04T08:27:45.000Z

Shipping Cost: 9.95 USD