Diode Dynamics 120mm Switchback HD Halos new and unopened

Description: DescriptionFeaturesProprietary durable phosphor coating, for uniform solid appearanceMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modesExtremely bright, high-density LEDs that are visible even in direct sunlightIntegrated mounting tabs for easy installationAssembled in USAOverviewHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.Sizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.Mounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20% of the halo can be removed using side-cutting snips and still remain fully functional. Click here to learn more: Cutting HD Halos and Strip video.Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:White: White Low Power, 50% brightnessRed: White High Power, 100% brightnessYellow: Amber Signal, double brightness, flashing (dims if powered more than two seconds)Black: GroundAll input wires activate the halos, at different brightness levels. All switchback halos ship with "low" priority drivers. This means that if both "low" and "high" power inputs are powered, the LED will light up in white, with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.This entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!In the Box:Two (2) LED halo ringsTwo (2) waterproof driversTwo (2) input wire pigtailsEight (8) T-tap connectorsInstallation guideQuantity: Two (2)Warranty: 3 year warranty FitmentNote: Depending on the installation location and proximity to other electronics in your vehicle, this product may cause radio interference at certain frequencies. How to Install: HD LED Halos and StripsDiode Dynamics' HD LED Halos and LED Strips feature a durable phosphor coating for a uniform appearance of the high-density (HD) LEDs in the halos and strips. They are available in various lengths, diameters, and colors allowing you to customize your vehicle to match your unique style! With no external controllers or dimmers required, they are easy to use and install!The following installation guide will provide you with basic installation instructions on how to install HD LED Halos and LED Strips in your vehicle's headlights.Please note: Headlights must be opened before proceeding with installation. This process can be completed by heating and prying the lens from the housing. We suggest viewing example videos online to understand the process, however, professional installation is strongly recommended. Please contact Diode Dynamics if you need assistance locating an installer.Table of ContentsInstallation InstructionsQuestions About the Installation?Where Can I Buy HD LED Halos & Strips?Installation InstructionsStep 1 - Mount HD LED Halo or Strip.Once the headlight is opened, mount the LED halo/strip using beading wire or JB Weld. Be sure to mount it in a location away from any light source to avoid heat damage. Step 2 - Route Wires.Next, route the wires through any shroud or bezel to the back of the headlight, sealing any holes that you may create. Step 3 - Connect to Driver.Connect the LED halo/strip connector to the driver and then connect the driver to the pigtail. See the diagram below.Next, tap the bare wires on the pigtail to 12V power and ground. This will dictate when the panels turn on. See the wire function in the table below.IMPORTANT: DO NOT plug the LED panel directly into the pigtail without the driver. The LEDs must be plugged into the driver first to control the power.Step 4 - Mount Driver.Mount the driver and tuck all wires. Driver should be mounted outside of headlight for serviceability, in a location away from the engine block to avoid excessive heat buildup. Step 5 - Test Function.Test thoroughly, reseal the headlight, and reinstall onto the vehicle. These are currently backordered from Diode Dynamics and take 10-12 weeks so get them here immediately.

Price: 99 USD

Location: Santa Rosa, California

End Time: 2025-01-30T21:20:56.000Z

Shipping Cost: N/A USD