Capton Tape High Temperature Resistant Polyimide Film Tape for Masking Pack of 4

Description: Heat resistant tape ,made from polyimide film with high temperature resistant silicone adhesiveThe highest temperature up to 662 ℉（350℃), Long-term temperature: 536 ℉（280℃）& Short-term temperature: 662 ℉（350℃）Excellent heat & solvent resistance Minimal shrinkage after baking and clean removalUsed on insulating circuit boards, etching, automotive sensor and manifolds,fiber optics cable, high temperature powder coating and semiconductor manufacturing.Size:1/4"(6mm) x 36yds, 1/2"(12mm) x 36yds, 3/4"(19mm) x 36yds, 1"(25mm) x 36yds, total 4 rolls. If you are not satisfied, we will refund 100% of your purchase. Product Description High Temperature Tape Polyimide film as the substrate (PI), coated with silicone glue on one side, the overall high temperature resistance can reach 280 degrees, with high and low temperature resistance, acid and alkali resistance, solvent resistance, electrical insulation (level H), radiation protection, etc. Product Introduction High Temperature Tape, also known as polyimide tape, uses polyimide film with excellent high temperature resistance and insulation as the base material (PI), coated with high temperature resistant silicone glue on one side, and the overall high temperature resistance can reach 280 degrees ; In the SMT transition peak soldering and reflow soldering process, it protects the PCB multi-finger parts from the corrosion of lead-free solder paste. It has the properties of high and low temperature resistance, acid and alkali resistance, solvent resistance, electrical insulation (H level), and radiation protection. Suitable for electronic circuit board wave soldering tin shielding, protection of golden fingers, high-end electrical insulation, motor insulation, and lithium battery positive and negative and ear fixing, etc. Product performance Heat resistant tape ,made from polyimide film with high temperature resistant silicone adhesiveThe highest temperature up to 662 ℉（350℃), Long-term temperature: 536 ℉（280℃）& Short-term temperature: 662 ℉（350℃）Excellent heat & solvent resistance Minimal shrinkage after baking and clean removalUsed on insulating circuit boards, etching, automotive sensor and manifolds,fiber optics cable, high temperature powder coating and semiconductor manufacturing. Product parameter Color Tawny Material Polyimide film Adhesion type Silicone Thickness 2.4 mil(0.06mm),1 mil polyimide film, 1.4 mil adhesive. Adhesive power(N/25mm) 7.5 Tensile strength(N/25mm) 115 Elongation 55% Breakdown Voltage 4.5kv Heat resistance -10℉ to 662℉. Long-term temperature: 536 ℉(280℃) & Short-term temperature: 662 ℉(350℃) Applications Insulated circuit board High temperature powder coating DIY T-shirt heat transfer 3D printing

Price: 16.05 USD

Location: Denver, Colorado

End Time: 2024-11-25T14:02:32.000Z

Shipping Cost: 0 USD