C7 Corvette LT1, LT4, LT5 Oil Cooler Adapter with Thermostat, 200ºF

Description: The C7 Corvette's water to oil heat exchanger is appropriate for a street car, but is wildly insufficient for track or performance use. Those looking to delete the factory heat exchanger and replace it with a high-efficiency air to oil cooler can use Improved Racing's thermostatic adapter to maintain precise control of oil temperatures. Improved Racing's adapter features a built-in thermostat that automatically bypasses the cooler until the oil reaches operating temperature. No need to worry about over-cooling the oil or long warm-up times!The adapter features standard female -8AN O-ring boss ports that accept optional male adapter fittings for -8AN, -10AN or -12AN lines. Two interchangeable OUT ports provide flexibility in line routing. A plug is included for the unused port, or an optional sensor adapter fitting may be used for an 1/8" NPT or M12x1.5 sensor. The extra port can also be used as a turbo oil feed or for plumbing an oil accumulator. Features and Benefits 100% bolt-on in place of the factory heat exchanger, just above the oil filter Built-in thermostat helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels Maintains a minimum oil temperature of 180°F (82°C), 200°F (93°C), or 212°F (100°C) in most conditions (select preferred temperature from the drop down above) Rebuildable - just send it back to us and we will replace the thermal actuator, spring and seals Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator Retains stock oil filter location Oil exiting the adapter is filtered oil 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish High-temp Viton seals Lifetime Warranty Made in the USA Available in -8AN, -10AN, or -12ANDimensions Includes 1x Thermostatic oil cooler adapter block for LT1/LT4 engines 1x Gasket 2x Zinc-plated steel mounting screws 1x -8AN plug Detailed installation instructions Optional Add-Ons 2x Black anodized -8AN, -10AN, or -12AN adapter fittings with Viton O-rings 1x 1/8" NPT or M12x1.5 sensor port adapter fitting Installation Notes This oil adapter is designed for O-ring boss fittings with a straight thread length of 0.500" or less. We recommend using our fittings in order to guarantee proper fitment and seal. We recommend using a straight hose end fitting for the OUT port and a 90-degree hose end fitting for the IN port. For additional clearance, use our low profile hose end fitting on the IN port (part number DO-090-08-08 (-8AN lines) or DO-090-10-08 (-10AN lines). Note only one O-ring boss adapter fitting is needed when using this low-profile hose end. Applications 2014-2019 Chevrolet Corvette (C7), all models Factory oil cooler delete is required. Purchase Improved Racing delete kit part # EC7-681. GM oil pan part numbers 12684491, 12696685, and 12696686 May fit GM trucks with Gen V Chevrolet small block V8 engines May fit other vehicles using the Gen V Chevrolet small block LT1, LT4, LT5, L86 and L83 engines Does not fit GM truck oil pan part # 12696280 Does not fit 6th GenCamaro SS and ZL1 oil pan (use part # EGM-136 instead) Does not fit 2014-2019 Cadillac CTS-V oil pan (use part # EGM-136 instead) Does not fit 2020+ Cadillac CT5 Blackwing Optional Parts Sold Separately Sensor Port Adapters (Optional) Select a sensor adapter for an extra OUT port. Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator. Sensor Port Size Part Number Qty Required 1/8" NPT OP-08-02 0-1 M12x1.5 OF-08-M12 0-1 Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Select the adapter fittings according to your oil line size (-10AN is recommended) Note: Our fittings are required to guarantee compatitility with our products, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required -8AN OM-10-08 0-2 -10AN OM-10-10 0-2 -12AN OM-10-12 0-2 Factory Oil Cooler Delete Kit (Optional) This kit is required for deleting the factory water-to-oil cooler Part Name Part Number C7 Corvette Facorty Oil Cooler Delete Kit EC7-681

Price: 229 USD

Location: Orlando, Florida

End Time: 2024-09-21T13:04:58.000Z

Shipping Cost: 9.95 USD